Category: NOVELL

21: You need to migrate your existing NetWare server, which is running NetWare 5.0, to NetWare 6.0. You’ve installed Migration Wizard 8.1 on your Windows 2000 Professional workstation, which also has the Novell Client 4.91 installed. You’ve installed the latest Support Packs on both your source and destination servers. Does this scenario meet Migration Wizard 8.1 system requirements?

A.Yes, all system requirements have been met.
B.No, you need to bind IPX on the destination server.
C.No, Migration Wizard 8 doesn’t support Novell Client 4.83.
D.No, Migration Wizard 8 doesn’t support NetWare 5.0 source servers.
E.No, Migration Wizard 8 doesn’t support Windows 2000 Professional.
F.No, Migration Wizard 8 doesn’t support NetWare 6.0 destination servers.
G.No, you shouldn’t have installed a Support Pack on the destination server.

Correct Answers: A

22: Which eDirectory object is used to associate an NMAS login sequence with a user?

A.CA
B.KAP
C.User object
D.Login Policy
E.Security Policy
F.Authorized Login Methods

Correct Answers: C

23: Which SET parameter will cause the server to attempt to recover from software abends, NMIs, and machine check exceptions?

A.SET AUTO RESTART AFTER ABEND = 0
B.SET AUTO RESTART AFTER ABEND = 1
C.SET AUTO RESTART AFTER ABEND = 2
D.SET AUTO RESTART AFTER ABEND = 3

Correct Answers: B

24: Which abend is almost always memory related?

A.Page fault
B.Invalid Opcode
C.Non Maskable Interrupt
D.General Protection Processor Exception
E.Ate Poison Pill in SbdWriteNodeTick given by some other node

Correct Answers: C

25: In which area of the Novell corporate web site will you find articles posted by readers who have discovered a new way of implementing a Novell product or a resolution to a problem?

A.News & Events
B.Cool Solutions
C.Services & Support
D.Company Information
E.Products & Solutions

Correct Answers: B

26: In which file does DSTRACE.NLM write its output, by default?

A.Sys:\Dstrace.log
B.Sys:\Public\Trace.log
C.Sys:\System\Dstrace.log
D.Sys:\System\Tracelog.txt

Correct Answers: C

27: Where are the files for the Tomcat service located on an OES NetWare server?

A.Sys:\Php5
B.Sys:\Tomcat
C.Sys:\System
D.Sys:\Tomcat4
E.Sys:\System\Tomcat

Correct Answers: B

28: Which command can be entered at the server console of a CIFS Backup Domain Controller (BDC) to delete an entire CIFS domain?

A.CIFS DELETE BDC
B.CIFS BDC REMOVE
C.CIFS DOMAIN LEAVE
D.CIFS DOMAIN DELETE
E.A domain can only be deleted from the server console of the domain’s PDC.

Correct Answers: E

29: You are configuring partition mirroring for a 400 GB NSS partition. Which statements are true regarding this configuration? (Choose 2.)

A.The partition must be mirrored to a RAID device.
B.The partition must be mirrored to another NSS partition.
C.Each partition should be located on different storage devices.
D.Both mirrored partitions must be within 10 MB of the same size.
E.The partition cannot be sharing a pool with another partition.

Correct Answers: B C

30: What must you do before deactivating a stored-on pool?

A.Run a VERIFY on the stored-on pool.
B.Run a REBUILD on the stored-on pools.
C.Rebuild the original pools that have snapshots on the stored-on pool.
D.Activate the original pools that have snapshots on the stored-on pool.
E.Deactivate the original pools that have snapshots on the stored-on pool.
F.Activate other stored-on pools that have snapshots on the stored-on pool to be deactivated.

Correct Answers: E

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

11: Your OES NetWare server’s DNS name is fs1.mycompany.com. Which URL would you use to access Apache Manager on this server?

A.http://fs1.mycompany.com:2200
B.https://fs1.mycompany.com:2200
C.https://fs1.mycompany.com:2002
D.https://fs1.mycompany.com:8009/apache.html
E.https://fs1.mycompany.com/nps/ApacheManager.html

Correct Answers: B

12: To balance the load in your network, you want to split heavily used volume USERS, an NSS volume, on FS1. You decide to split the volume at the USERS:\EXTERNAL\CONTRACTORS subdirectory. The destination volume is an NSS volume on server FS2. Given that both servers are OES NetWare servers in the same DFS Management context, can this be done?

A.No, you must apply Support Pack 1.1 or later.
B.No, you can’t split a volume at the subdirectory level.
C.No, you can’t split an NSS volume to another NSS volume.
D.No, the servers must reside in different DFS Management Contexts.
E.Yes, the prerequisite requirements for this move request have been met.
F.No, split operations for NSS volumes can only occur between servers in different contexts.

Correct Answers: E

13: You’ve just inserted a CD disc into the DVD drive in your OES NetWare server. The disc was automatically detected and mounted as an NSS volume named USER_STUFF. Which command will create an associated object for the new volume in your eDirectory tree?

A.nss /UpdateCDtoNDS=USER_STUFF
B.nss /UpdateDVDtoNDS=USER_STUFF
C.nss /UpdateCDtoeDir=USER_STUFF
D.nss /UpdateDVDtoeDir=USER_STUFF

Correct Answers: A

14: Which file would you modify if you wanted to increase the security timeout value used by iManager?

A.Sys:\Etc\iManager.conf
B.Sys:\System\iManager.xml
C.Sys:\Tomcat4\Conf\Web.xml
D.Sys:\Apache2\Conf\iManager.conf

Correct Answers: C

15: Which changes are made to the destination server’s Autoexec.ncf file by the Migration Wizard during the migration process? (Choose 2.)

A.The time server type is changed to Single Reference.
B.The server name is changed to match the name of the source server.
C.The CIFS user context is changed to match the CIFS user context of the source server.
D.The bindery context value is changed to match the bindery context used on source server.
E.The time zone value is changed to match that of the closest Single Reference time provider.
F.The server ID is modified to match the IPX internal net number or server ID of the source server.

Correct Answers: B F

16: Your server is running slowly and you have noticed that server processes have reached the maximum. Which utility can you use to increase the Maximum Server Processes parameter?

A.iMonitor
B.iManager
C.ConsoleOne
D.CONFIG.NLM
E.Remote Manager

Correct Answers: E

17: Which log file is used for documentation of eDirectory solutions or to document changes made to the server?

A.NDSD.LOG
B.TRACE.LOG
C.ABEND.LOG
D.SYSTEM.LOG
E.HEALTH.LOG
F.SYS$LOG.ERR
G.NRMUSERS.LOG

Correct Answers: G

18: Which OES NetWare server console command can be used to test the server’s DNS name resolution configuration?

A.CONFIG
B.TCPCON
C.IPCONFIG
D.IFCONFIG
E.NSLOOKUP
F.DNSCONFIG
G.BINDCONFIG

Correct Answers: E

19: You want to activate a pool snapshot named VOL1_POOL_S4. Which command should you enter at the server console?

A.mm VOL1_POOL_S4
B.mm activate VOL1_POOL_S4
C.nss activate VOL1_POOL_S4
D.nss /activate VOL1_POOL_S4
E.mm snap activate VOL1_POOL_S4
F.nss snap activate VOL1_POOL_S4

Correct Answers: E

20: Which database service does Archive and Version Services 2.0 use by default?

A.MySQL
B.Oracle
C.Sybase
D.PostgreSQL
E.Microsoft SQL Server

Correct Answers: A

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

1: Which instance of Apache Web Server running on an OES NetWare server is used to manage other services on the server, such as iPrint and eGuide?
A.Slave Instance
B.Public Instance
C.Master Instance
D.Management Instance
E.TCP Wrapper Instance
F.Administration Instance
Correct Answers: F

2: Which commands force a schema synchronization to occur?
A.SET DSTRACE =+schema
SET DSTRACE =*f
B.SET DSTRACE =+schema
SET DSTRACE =*h
C.SET DSTRACE =+schema
SET DSTRACE =*l
D.SET DSTRACE =+schema
SET DSTRACE =*p
E.SET DSTRACE =+schema
SET DSTRACE =*s
Correct Answers: E

3: What’s the maximum number of CPUs supported by OES NetWare?
A.2
B.4
C.8
D.16
E.32
F.64
G.128
Correct Answers: E

4: By default, where is a core dump saved to?
A.C:\
B.SYS:
C.SYS:ETC
D.SYS:SYSTEM
E.C:\NWSERVER
Correct Answers: A

5: Which tool is used to fix problems with an NSS pool that could not be corrected with other techniques?
A.VCU
B.VERIFY
C.REPAIR
D.REBUILD
E.NSSSCAN
F.NSSREPAIR
G.POOLREPAIR
Correct Answers: D

6: If your OES NetWare server’s DNS name is fs2.ema.com, what URL would you use to access Tomcat Admin?
A.http://fs2.ema.com/tomcat/admin
B.https://fs2.ema.com:2200/tomcat/
C.https://fs2.ema.com/tomcat/admin
D.https://fs2.ema.com/tomcat/admin/
E.https://fs2.ema.com:8009/tomcat/admin/
Correct Answers: D

7: Which server console command will load the NSS Volume Locator Database Management service on an OES NetWare server?
A.VLDB
B.NVLDB
C.VLDBM
D.VLRPR
E.NVLDBM
Correct Answers: A

8: Your OES NetWare server has a DNS name of da2.da.com. Which URLs could you use to access Remote Manager on this server? (Choose 2.)
A.http://da2.da.com:8008
B.http://da2.da.com:8009
C.https://da2.da.com:8009
D.https://da2.da.com:8008
E.http://da2.da.com:8008/nrm.html
F.https://da2.da.com:8009/nrm.html
G.http://da2.da.com:8009/remotemanager.html
H.https://da2.da.com:8008/remotemanager.html
Correct Answers: A C

9: When is Autoexec.ncf executed during server start-up?
A.Immediately after Startup.ncf
B.Between LOADSTAGE 1 and LOADSTAGE 2
C.Between LOADSTAGE 2 and LOADSTAGE 3
D.Between LOADSTAGE 3 and LOADSTAGE 4
E.Between LOADSTAGE 4 and LOADSTAGE 5
Correct Answers: E

10: You’ve just implemented the CIFS service on an OES NetWare server. You want it to become a member of a domain hosted by another OES NetWare server that is configured as a Primary Domain Controller. Which server console command will do this?
A.JOIN DOMAIN
B.CIFS BDC ENABLE
C.CIFS DOMAIN BDC
D.CIFS DOMAIN JOIN
E.CIFS DOMAIN CREATE
F.CIFS DOMAIN MEMBER
Correct Answers: D

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 practice tests.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

41: You are migrating a NetWare 5.1 server to OES NetWare. You’ve reached the eDirectory migration portion of the Migration Wizard. The first step in this process edits the server name in several configuration files on the destination server. Which files are included in this process? (Choose 2.)
A.Ctx.cfg
B.Csl.cfg
C.Slpda.cfg
D.Snmp.cfg
E.Cifsctx.cfg
F.Attypes.cfg
G.Startup.ncf
H.Rootcert.der
I.Timesync.cfg
Correct Answers: D

I
42: When implementing the Archive and Versioning service, what is the role of the ARKCONFIG.XML file?
A.It contains configuration settings for the Archive Server.
B.It contains XML code for configuring an upgrade from Archive and Versioning Services 1.0.
C.It contains XML configuration settings for the Archive and Versioning Services MySQL instance.
D.It contains XML code that connects the Archive and Versioning service with an external database, such as a Microsoft SQL Server database.
Correct Answers: A

43: Which server console command loads the Apache Manager service on an OES NetWare server?
A.WEBMAN
B.WMSTART
C.AP2WEBMAN
D.WEBMANSTRT
E.APACHE2WMSRT
Correct Answers: C

44: Which option moves an existing NetWare server’s file system and the eDirectory database to a different computer?
A.Remote Upgrade
B.In-place Upgrade
C.Down-Server Upgrade
D.Across-the-Wire Upgrade
E.Across-the-Wire Migration
F.Compatibility-Mode Migration
Correct Answers: E

45: Which statements are true concerning NetWare iSCSI?
A.iSCSI requires the use of fiber optic network cabling.
B.iSCSI is usually more expensive to implement than Fibre Channel.
C.iSCSI can use either the IP or the IPX protocol to create a SAN.
D.The iSCSI SAN can share Ethernet networking hardware with your regular network data.
E.Novell’s iSCSI implementation is not compatible with iSCSI storage appliances from companies such as Cisco or Adaptec.
Correct Answers: D

46: Which versions of NetWare are supported as source server operating systems by Migration Wizard 8.1? (Choose 3.)
A.NetWare 3.1
B.NetWare 3.2
C.NetWare 4.1
D.NetWare 4.11
E.NetWare 4.2
F.NetWare 5.0
G.NetWare 5.1
H.NetWare 6.5
Correct Answers: F G H
47: Which server console command is used to verify the consistency of the cryptographic keys on your server required to communicate with other servers in the tree?
A.LOAD SECURE.NLM
B.LOAD CONFIG.NLM
C.LOAD SDIDIAG.NLM
D.LOAD MONITOR.NLM
E.LOAD PKICHECK.NLM
F.LOAD SDINOTES.NLM
G.LOAD SECUREDIAG.NLM
Correct Answers: C

48: You have noticed that your OES NetWare server is not recognizing all of the RAM installed in the system. Which are probable causes of this problem? (Choose 2.)
A.The DOS=HIGH command is in CONFIG.SYS.
B.The cache buffers have fallen below 20%.
C.HIMEM.SYS is being loaded in AUTOEXEC.BAT.
D.The server processes have reached the maximum.
E.An NLM is not returning memory when it is finished with it.
F.A DOS-based network board driver is being loaded in AUTOEXEC.BAT.
Correct Answers: A C
49: When a server abends, a log file is created. Where can you find this file after the server has been restarted?
A.C:\
B.SYS:
C.SYS:\_ABEND
D.SYS:\SYSTEM
E.C:\NWSERVER
F.SYS:\SYSTEM\_ABEND
Correct Answers: D

50: Anytime a user in your eDirectory tree logs into the Domain hosted by the CIFS service on your OES NetWare server, the user’s object is automatically added to which group?
A.SMB Users
B.CIFS Users
C.Domain Users
D.Domain Admins
E.Domain Groups
F.Domain Guests
G.Domain Controllers
Correct Answers: C

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

31: What is the name of the file used to install most Novell Modular Authentication Services login methods?
A.setup.exe
B.config.txt
C.config.ini
D.install.txt
E.products.ini
Correct Answers: B

32: After issuing the MODULES command at the server console of your OES NetWare server, you notice that a particular NLM is displayed in purple. What does this indicate about the module?
A.The NLM was auto-loaded by another module.
B.The NLM was loaded from Startup.ncf or from Autoexec.ncf.
C.The NLM was bound into Server.exe and was loaded from there.
D.The NLM was bound into Server.exe, but was also found in C:\Nwserver and was loaded from there instead.
Correct Answers: A

33: You’ve recently created an encrypted NSS volume on your OES NetWare server. The volume appeared to function correctly after creation. After rebooting the server, however, the encrypted volume is no longer available. What caused this to happen?
A.The volume is corrupt. Use the nss /PoolRebuild command to recover the data.
B.The encryption key has become corrupt. Use PKIDIAG.NLM to regenerate the key.
C.You must manually activate the encrypted volume and supply the password after reboot.
D.You need to run SDIDIAG.NLM to verify that encryption keys are consistent throughout the eDirectory tree.
Correct Answers: C

34: You’re troubleshooting an intermittent connectivity problem between the Windows XP client workstations and the OES NetWare server in your network. You need to test communications across your organization’s routers using a packet size larger than the 32-byte size used by the Windows PING utility by default. What switch will configure PING to send packets that are 1024 bytes (1 KB) in size?
A.-c 1
B.-n 1
C.-l 1024
D.-a 1024
E.-s 1024
F.-ps 1024
Correct Answers: C

35: You’ve loaded DSTRACE.NLM at your server console. You want to trace Limber (LMBR) processes as they occur in your tree. Which command will accomplish this?
A.DSTRACE +LMBR
B.DSTRACE LMBR ON
C.DSTRACE LMBR=ON
D.DSTRACE LMBR +SCREEN
E.SET DSTRACE LMBR = ON
Correct Answers: A

36: Which command is used to load the iSCSI initiator service on an OES NetWare server?
A.TON
B.ION
C.ISINIT
D.INITON
E.ISCSINIT
F.INITIATOR
Correct Answers: B

37: You need to add an A record to the DNS service running on your OES NetWare server. Which utility should you use to do this?
A.iMonitor
B.iManager
C.ConsoleOne
D.Remote Manager
E.DNS Administrator
F.NetWare Administrator
Correct Answers: B

38: Which file is used to configure the Public instance of the Apache Web Server on OES NetWare?
A.Sys:\Etc\Httpd.conf
B.Sys:\System\Httpd.conf
C.Sys:\Apache2\Apache2.conf
D.Sys:\Apache2\Conf\Httpd.conf
E.Sys:\Adminsrv\Conf\Httpd.conf
Correct Answers: D

39: Which statement is true concerning a CIFS Primary Domain Controller running on OES NetWare?
A.Trust relationships are not supported.
B.Active Directory functionality is supported.
C.Replication between Microsoft and Novell PDCs is supported.
D.Windows domain administration utilities can be used to manage a Novell PDC.
Correct Answers: A

40: Which statements are true regarding running a directory service repair when using iMonitor? (Choose 2.)
A.You can only repair a single object when running repair within iMonitor.
B.You can only run a repair on the server from where iMonitor is running.
C.If DSREPAIR is loaded at the server console, the Repair option in iMonitor cannot run.
D.You can only repair objects in the same container as the server from which you are running iMonitor.
Correct Answers: B C

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

21: Which RAID levels can be implemented with NSS? (Choose 3.)
A.0
B.1
C.2
D.3
E.4
F.5
G.6
H.7
Correct Answers: A B F

22: The Apache 2 Web Server and Tomcat Servlet Container services have been installed and configured on your OES NetWare server. You’ve downloaded a Tomcat application from the Internet in the form of a WAR file and want to install it on your server. Where should you copy the WAR file to do this?
A.Sys:\Perl
B.Sys:\Apache2\Bin
C.Sys:\Apache2\htdocs
D.Sys:\Apache2\Cgi-bin
E.Sys:\Tomcat\4\Webapps
F.Sys:\Tomcat\4\Modules
Correct Answers: E

23: If you are at the NetWare internal debugger screen, which command will force a core dump?
A..c
B..d
C..g
D..q
E..x
F..f
Correct Answers: A

24: Which method allows you to increase the amount of storage space on a server without adding more storage devices?
A.Overbook the storage pool.
B.Increase the size of the storage pool.
C.Decrease the size of the storage pool.
D.Recreate the partitions that a storage pool contains.
Correct Answers: A

25: Which command is used to load the iSCSI target service on an OES NetWare server?
A.TON
B.ION
C.ITAR
D.TARON
E.TARGET
F.SCSITAR
Correct Answers: A

26: You are working in a pure IP environment and the workstation is not communicating with the server. Which are some valid troubleshooting steps that can be executed on the workstation to help identify the problem? (Choose 3.)
A.Ping the server.
B.Use TRACERT.
C.Verify that DSTRACE is not running.
D.Use CONFIG to verify that the network board is bound.
E.Verify the workstation’s IP address with the IPCONFIG command.
F.Run DSTRACE to verify that there are no DS communication issues between the workstation and server.
Correct Answers: A B E
27: Which module is used by the Public Instance of the Apache Web Server on an OES NetWare server to authenticate users to eDirectory?
A.proxy
B.mod_edir
C.mod_php5
D.moddavfs
E.mod_auth_ldap
Correct Answers: E

28: When does synthetic time occur in an eDirectory tree?
A.When there is no time source in the tree
B.When a secondary server acts like a time source
C.When time is not synchronized throughout the network
D.When an object is modified within the same second from two different sources
E.When an eDirectory object has a modification time stamp in the future of the current network time
Correct Answers: E

29: Which server console command will enable shredding on a snapshot pool?
A.nss /SnapShred = pool_snapshot_name
B.SET snap shred = pool_snapshot_name
C.mm snap shred pool_snapshot_name = on
D.SET snap shred pool_snapshot_name = on
Correct Answers: C

30: Your OES NetWare server’s name is PROD10. What is the default server name used by the CIFS service running on this server?
A.PROD10
B.PROD10-W
C.PROD10-SMB
D.PROD10-CIFS
E.There is no default server name. You must configure it manually.
Correct Answers: B

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 practice tests.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

11: Your OES NetWare server has been assigned the DNS name of da1.da.com. Which URL would you use to access iMonitor on this server?
A.http://da1.da.com:8009/nds-summary
B.http://da1.da.com:8009/edir-summary
C.https://da1.da.com:8009/nds-summary
D.https://da1.da.com:8008/nds-summary
E.https://da1.da.com:8009/edir-summary
F.https://da1.da.com:8008/edir-summary
Correct Answers: C

12: When accessing iManager 2.5, you authenticate as DTracy.SYD.DA. The roles you need are not displayed. How can you fix this problem?
A.Restart Tomcat on the server.
B.Restart Apache Web Server on the server.
C.Delete all existing roles and then manually rebuild them.
D.Close the browser window, then reauthenticate as DTracy.
E.Check the Tomcat configuration file to make sure iManager has been configured correctly.
F.Authenticate as admin to iManager and assign the missing roles to the DTracy user object.
Correct Answers: F

13: What can a DFS junction point to?
A.A CIFS sharepoint.
B.A subdirectory on a volume on the local server.
C.A subdirectory on a volume on a remote server in the same eDirectory tree.
D.A subdirectory on a volume on a remote server in a different eDirectory tree.
E.The root directory of a volume on a remote server in the same eDirectory tree.
F.The root directory of a volume on a remote server in a different eDirectory tree.
Correct Answers: E

14: Which NSS module must be loaded to mount CD-ROM and DVD discs as NSS volumes on an OES NetWare server?
A.dvd.nss
B.cddvd.nss
C.cdrom.nss
D.cd9660.nss
Correct Answers: B

15: Which NMAS security labels can be associated with an NMAS clearance? (Choose 2.)
A.Delete label
B.Read label
C.Modify label
D.Write label
E.Create label
F.Browse label
Correct Answers: B D
16: You have configured your OES NetWare server such that, if it abends, you must respond manually. Your server abended with a processor exception and lists a short list of options for you to choose from. You want to perform a core dump, which option should you enter at the server console?
A.Q
B.R
C.S
D.X
E.Y
Correct Answers: E

17: Which NETSTAT switch on a Windows XP workstation shows all connections and listening ports?
A.-a
B.-r
C.-s
D.-cp
E.-c -p
F.-p TCP
G.-p UDP
Correct Answers: A

18: Click the Point-and-Click button to begin.
The graphic shows the NSS volume attributes. Click the feature that you should activate to assign a maximum space allotment for a directory.

Correct Answers:

19: Click the Point-and-Click button to begin.
Click on the option that will allow you to view the preconfigured eDirectory reports.

Correct Answers:

20: Which commands are used to start and stop the Administrative Instance of Tomcat on an OES NetWare server? (Choose 2.)
A.tc4stop
B.tcstart
C.tcadmup
D.tcadmdn
E.admsrvup
F.tcadmstop
G.tc4admstart
Correct Answers: C D

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 practice exams.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html

1: You have configured a DFS Management Context with the VLDB service running on DA1. In the SHARED directory on DA1’s DATA volume, you created a junction to the root of the VOL1 volume on DA2. You then created a CIFS share for the SHARED directory and granted the appropriate rights to your user and group objects to access the directory. When users access the junction from their Windows 2000 Professional workstations without the Novell Client installed, it fails to take them to VOL1 on DA2. Which is the resolution to this problem?
A.Load VLDB.NLM on DA2.
B.Add a VLDB replica to DA2.
C.Enable DFS support for CIFS clients.
D.Upgrade the workstations to Windows XP Home or Professional.
E.Run the VERIFY utility to check the integrity of the pool where VOL1 resides on DA2.
Correct Answers: C

2: You have an NSS pool named APPS_POOL. You have taken 4 snapshots of it. What is the default name assigned by NSS to the 4th snapshot of the pool?
A.APPS_POOL4
B.APPS_POOL-4
C.APPS_POOL_4
D.APPS_POOL_S4
E.APPS_POOL_S_4
F.APPS_POOL_4_S
Correct Answers: D

3: Which server console command will remove a Backup Domain Controller (BDC) from a CIFS domain?
A.CIFS REMOVE BDC
B.CIFS BDC REMOVE
C.CIFS DOMAIN LEAVE
D.CIFS DOMAIN DELETE
Correct Answers: C

4: Which type of abend occurs when a process tries to address a memory location above the physical memory limit?
A.CPU Hog
B.OS Check Exceptions
C.Illegal String Fault
D.Non Maskable Interrupt
E.General Protection Fault
F.General Protection Processor Exception
Correct Answers: F

5: Click the Point-and-Click button to begin.
Click on the iMonitor link that will display every server that holds a replica of the current partition.

Correct Answers:

6: The Begin NDS/eDir Migration step in your NetWare 6 to OES NetWare migration failed. The destination server did not reboot and take on the name and identity of the source server. You now need to restore Directory Services on the source server. In what file did the Migration Wizard back up your eDirectory information on the source server?
A.Sys:\System\Nds.bak
B.Sys:\System\eDir.bak
C.Sys:\_Netware\Nds.bak
D.Sys:\System\Nuw30\Ndsbu
E.Sys:\System\Nuw30\eDirbu
Correct Answers: D

7: Click the Exhibit button to begin.
You need to change the IP address of your server from 10.200.200.1 to 172.16.53.1. Given the information displayed in the Configuration Summary in the Exhibit, which services running on your server will automatically use the new IP address after the change is made? (Choose 2.)

A.NLS Metering
B.DNS Server UDP
C.DNS Server TCP
D.Apache 2.0 Port 80
E.Apache Admin Port 2200
Correct Answers: A D
8: You notice that several files on an NSS volume on your OES NetWare server aren’t compressing, even though the Compression attribute has been enabled on the volume. What is the most likely cause of this problem?
A.The encryption keys in the eDirectory tree have become inconsistent.
B.The volume does not have enough free space to compress large files.
C.The file system is corrupt and must be rebuilt using the nss /PoolRebuild command.
D.The Do Not Compress attribute has been enabled on the files or their parent directories.
Correct Answers: D

9: You want to add two NSS volumes named USERS and APPS to your OES NetWare server. To do this, you plan to install a single 300 GB SCSI hard disk drive in your server. You will create a single partition that encompasses the entire drive. You plan to create a single NSS pool from the partition and create the USERS and APPS volumes in the pool. The USERS volume will be 250 GB in size while the APPS volume will be 100 GB in size. Can you do this?
A.Yes, all NSS prerequisites have been met.
B.No, you can’t create two NSS volumes within the same storage pool.
C.No, you must create two partitions on the drive, one for each NSS volume.
D.No, the sum of the sizes of all volumes in an NSS pool can’t exceed the size of the pool.
Correct Answers: A

10: A volume on your OES NetWare server has a security label of Password and Token. A user in your tree has logged in using an eDirectory password and a smart card, granting him a clearance with a Read label of Password and Token and a Write label of Password and Token. What level of access does the user have to the volume?
A.No access
B.Read only access
C.Write only access
D.Read and Write access
Correct Answers: D

If you want to pass NOVELL 050-707 successfully, donot missing to read latest lead2pass NOVELL 050-707 practice tests.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/050-707.html